Preparation
Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils and salts.
► Surfaces in sound condition:
Apply 2 coats of DECONYL FLAT.
► New plaster, concrete, brick, cement:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of DECONYL FLAT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL FLAT.
► New gypsum board or putty:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of DECONYL FLAT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL FLAT.
► Old water-based or lime paints:
Prime with FERM (H2O) thinned up to 50% with water. Apply 2 coats of DECONYL FLAT.