DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 3 L
  • 10 L

FERM 500

water-based undercoat for emulsion paints

Water-based undercoat for emulsion paints. Very good adhesion, toughness and elasticity. Great resistant to alkaline surfaces. Contributes efficiently in the coverage of the finish coat. Provides a uniform mat finish for the finish coat. Quick-drying, allows recoating the same day and seals the surface.

  • great coverage & strong adhesion
  • surface stabilising
  • cost-effective solution
1
BUILDINGS – INTERIOR USE
matt
Finish
toolsall
TOOLS
FERM 500
THINNING
1-2 hr
DRYING TIME
1-3 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
35 5
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from loose or flaking material, dust, oils and salts. Putty any surface defects. Prime locally with FERM 500.

New plaster, concrete, brick, cement:
Prime with FERM 500 thinned 1 (product): 4 (water).
New gypsum board or putty:
Prime with FERM 500 thinned 1 (product): 4 (water).

Use

Roller, brush or spray airless. Thin by 400% with water.

► Stir well before use and during application.
► For best results, surfaces should not be exposed to direct sunlight during paint application.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 1-3 hours.

Practical coverage: 30-40m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for