DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 3 L
  • 10 L

BETONYL I-21

exterior acrylic paint

Acrylic paint suitable for exterior surfaces. Apply on concrete, cement mortar, plaster, etc. after careful surface preparation. Ideal for interior surfaces with particular washing and cleaning demands. Protects against adverse weather conditions. Good hiding power combined with high coverage and quick drying properties. Seals the surface allowing it to breath. Provides a smooth matt finish.

  • high coverage and hiding power
  • withstands frequent washing
  • uniform finish
xrisi2xrisi2
BUILDINGS
INTERIOR-EXTERIOR USE
matt
Finish
toolsall
TOOLS
BETONYL I-21
THINNING
1-2 hr
DRYING TIME
2-4 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
11 2
m2/L
SPREADING RATES
N.61

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils and salts.

New porous plaster, concrete, brick, cement:
Prime with FERM (H2O) thinned up to 50-100% with water. Apply 2 coats of BETONYL I-21.


Sound previously painted substrates:
Apply 2 coats of BETONYL I-21.

Use

Roller, brush or spray airless. Thin by 10-20% with water.

►        Stir well before use and during application.

►        Allow newly poured concrete to cure for 30 days, then prime with FERM (H²O) before painting with BETONYL I-21.

►        For best results, surfaces should not be exposed to direct sunlight during paint application.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 2-4 hours.

Practical coverage: 9-13m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for