DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 3 L
  • 10 L

BETONYL SILER

elastomeric insulating and waterproofing roof coating

Water-based elastomeric insulating and waterproofing coating for the protection of horizontal and sloped surfaces against humidity. Ideal for roofs, parapet walls, light wells, ceramic tile roofs, gutters, etc. Covers hairline and minor cracks perfectly. Good ability to expand and contract with the substrate. Apply on concrete, plaster, roof slabs, bricks, wood, bitumen, etc. to create an impermeable waterproof membrane (resistant even to standing water) that maintains its elasticity even at very low temperatures. Protects building structure against water ingress. Extremely resistant to rain, snow, harsh sun, sudden temperature changes, humidity, mildew and chemical pollution. Great adhesion and high elasticity. Creates a non-sticky membrane. Bridges existing and future minor cracks ensuring a waterproof surface. Resistant to high temperatures and frost. Elastic properties maintained even at temperatures above 50°C and below -15°C. Energy saving due to the limited use of heating sources.

  • exceptional elasticity & strong adhesion
  • resistant to temperature fluctuations
  • solar reflective
1
BUILDINGS – EXTERIOR USE
satin
Finish
toolsall
TOOLS
BETONYL SILER
THINNING
2-3 hr
DRYING TIME
24-48 hrs
OVERCOATING INTERVAL
2- 3
RECOMMENDED COATS
2 3
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from loose or flaking material, dust, oils and salts.

New absorbing cement, plaster, roof slabs, brick, wood, bitumen:
Prime with FERM (H2O) thinned up to 50-100% with water. Apply 2-3 coats of BETONYL SILER.
Sound previously painted substrates:
Apply 2 coats of BETONYL SILER.

Use

► Stir well before use and during application.
► Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O) before painting with BETONYL SILER.
► For best results, surfaces should not be exposed to direct sunlight during paint application.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 2-3 hours.

Recoat: 24-48 hours.

Practical coverage: 1-3m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for