DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 1 L
  • 2.5 L

DECO VAROSI

decorative water-based coating with impressive relief finish

Decorative water-based coating awakening the senses. It contains colored flakes which create an impressive result when they dry. The application is a fascinating experience since the personal creativity is expressed as the paintbrush moves.

  • exciting results in just a simple move
  • granite aspect or "aged" look
  • endless shades combinations
xrisi2xrisi2
BUILDINGS
INTERIOR-EXTERIOR USE
satin
Finish
special
Special
DECO VAROSI
THINNING
1-2 hr
DRYING TIME
24 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
4 2
m2/L
SPREADING RATES
colortouch TINTING
water READY TO USE COLOR SHADES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from loose or flaking material, dust, oils and salting.

Surfaces on sound condition: Prime with DECO PRIMER in the shade of your choice. Apply 1-2 coats of DECO VAROSI (GRANITE).

New plaster, concrete, brick, cement: Prime with DECO PRIMER in the shade of your choice. Apply 1-2 coats of DECO VAROSI (GRANITE).

New gypsum board or putty: Prime with DECO PRIMER in the shade of your choice. Apply 1-2 coats of DECO VAROSI (GRANITE).

Old water-based or lime paints: Prime with FERM (H2O) thinned up to 50% with water. Then prime with DECO PRIMER in the shade of your choice. Apply 1-2 coats of DECO VAROSI (GRANITE).

Use

Brush, trowel or spray airless. Thin by 0-3% with water.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 24 hours.

Practical coverage: 2-6m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for