DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 3 L
  • 9 L

HOUSE PAINT

acrylic emulsion paint for professionals

New generation acrylic emulsion paint based on a set of state-of-the art raw materials. Good resistance to frequent washing. Suitable for interior and exterior concrete, plaster, gypsum board, etc. A cost-effective and reliable solution for professionals. Ultimate hiding power. Suitable for painting and refreshing frequently repainted areas, such as public buildings, ceilings, warehouses.

  • high coverage and hiding power
  • withstands frequent washing
  • smooth and velvet finish
xrisi2xrisi2
BUILDINGS
INTERIOR-EXTERIOR USE
matt
Finish
toolsall
TOOLS
HOUSE PAINT
THINNING
1-2 hr
DRYING TIME
4-6 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
10 2
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils and salts.

New porous plaster, concrete, brick, cement:
Prime with FERM (H2O) thinned up to 50-100% with water. Apply 2 coats of HOUSE PAINT.
Sound previously painted substrates:
Apply 2 coats of HOUSE PAINT.

Use

Roller, brush or spray airless. Thin by 5-15% with water.

► Stir well before and during application.
► Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O).
► For best results, surfaces should not be exposed to direct sunlight during paint application.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 4-6 hours.

Practical coverage: 8-12m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for