DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 3 L
  • 9 L

PROFESSIONAL VINYL

professional interior low-cost emulsion paint

Interior emulsion paint, ideal for plaster, gypsum board, concrete, brick, etc. A cost-effective and reliable solution for professionals. High coverage and hiding power. Ideal solution for surfaces with no particular demands. Suitable for painting and refreshing areas, such as public buildings, roofs, schools, hospitals, warehouses with needs for frequent repainting.

  • ideal for frequent use
  • high coverage and hiding power
  • uniform matt finish
1
BUILDINGS – INTERIOR USE
matt
Finish
toolsall
TOOLS
PROFESSIONAL VINYL
THINNING
1-2 hr
DRYING TIME
2-4 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
10 2
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from loose or flaking material, dust, oils and salts.

Surfaces in sound condition:
Apply 2 coats of PROFESSIONAL VINYL.


New plaster, concrete, brick, cement:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of PROFESSIONAL VINYL.


New gypsum board or putty:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of PROFESSIONAL VINYL.


Old water-based or lime paints:
Prime with FERM (H2O) thinned up to 50% with water. Apply 2 coats of PROFESSIONAL VINYL.

Use

Roller, brush or spray airless. Thin by 10-20% with water.

►        Stir well before use and during application.

►        Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O) before painting with PROFESSIONAL VINYL.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 2-4 hours.

Practical coverage: 8-12m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for