DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 350 ml
  • 750 ml
  • 2.5 L

AQUAGLOSS

polyurethane water-based enamel

Premium water-based gloss top coat based on polyurethane-modified resins. Odourless vanish, ideal for interior use. Due to its composition, this enamel also ensures excellent results on exterior surfaces. Ideal for use on metal (balustrades, steel structures, etc.) and wood (doors, door/window frames, closets, windows). Being extremely adhesive, this enamel is ideal for recoating surfaces previously painted with solvent-based enamels. Creates an elastic surface with great resistance to frequent washing/rubbing. Great coverage and hiding power, that ensure an excellent finish. This enamel is easy to apply, non splitting and has excellent spreading capacity. The velvet finish created will retain its brightness over time without yellowing.

  • exceptional toughness & elasticity
  • outstanding resistance & adhesion
  • excellent spreading capacity, easy to apply
xrisi3xrisi3
BUILDINGS
INTERIOR-EXTERIOR USE
xrisi3
MARINE USE-FREEBOARDS
highgloss
Finish
toolsall
TOOLS
AQUAGLOSS
THINNING
1-2 hr
DRYING TIME
4-6 hrs
OVERCOATING INTERVAL
2
RECOMMENDED COATS
11 2
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Remove all weathered coatings, loose materials and oils. Sand and remove sanding residue with a rag.

► New wood:
Sand and clean sanding residue. Apply putty. Apply 1-2 coats of wood preservative POLACRYL 321. Prime with AQUARUST undercoat, 1-2 coats. Apply 2-3 coats of AQUAGLOSS.

► New metal:
Sand and clean sanding residue. Apply putty. For a better antirust protection, apply 1-2 coats of AQUARUST or ANTIRUST or MARINE MINIO. Apply 2-3 coats of AQUAGLOSS.

► Smooth and stable substrate previously painted with solvent-based paints:
Sand lightly and clean sanding residue. Prime with AQUAPRIMER (wood) or AQUARUST (metal), 1 coat, depending on the type of the surface. Apply 2 coats of AQUAGLOSS.

Use

Roller, brush or spray airless. Thin by 5-10% with water.

Minimum application temperature:50C.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness. Touch dry: 1-2 hours. Recoat: 4-6 hours. Practical coverage: 9-13m2/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for