DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 3 L
  • 10 L

AQUAFERM

high hiding power acrylic impregnation primer

High hiding power acrylic bonding primer. Suitable for the protection of gypsum-board, putty, concrete, brick, wood, etc. Apply on all surfaces requiring preparation with a high hiding power impregnation primer before application of emulsion, acrylic paints or textures. Due to its capacity to be tinted with numerous shades, it reduces drastically the substrate's absorption capacity and thus, the amount of paint used. Special anti-splatter formulation. Quick-drying, allowing recoating on the same day. Seals the surface. High hiding power. Due to its high filling capacity, it provides the right balance between the absorption capacity of the gypsum board paper, the joint filler and the surfaces to be painted. Ensures a smooth surface for premium finishes. Practically odourless during application.

  • ideal for gypsum board
  • strong adhesion
  • countless shades
xrisi2xrisi2
BUILDINGS
INTERIOR-EXTERIOR USE
matt
Finish
toolsall
TOOLS
AQUAFERM
THINNING
1-2 hr
DRYING TIME
2-4 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
14 2
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Remove all weathered-peeled off coatings, dust, oils, salts and mildew. Surface must be clean and dry.
Putty any surface defects.
Prime locally with AQUAFERM. Apply AQUAFERM in the shade of your choice on the entire surface.

Surfaces in sound condition:
Apply 1 coat of AQUAFERM.
New plaster, concrete, brick, cement:
Apply 1 coat of AQUAFERM in the shade of your choice. Paint after 30 days.
New gypsum board or putty:
Apply 1 coat of AQUAFERM in the shade of your choice.

Use

Roller, brush or spray airless. Thin by 10-30% with water. 

► Stir well before use and during application.
► For application with a roller or a brush, apply one or two coats thinned with water by 10-20%. For application with an airless spray gun, thin with water by 15-30%.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 2-4 hours.

Practical coverage: 12-16m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for