DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
SOLVENT BASED
  • 750 ml
  • 2.5 L

ANTIRUST CHASSIS

anticorrosive paint for metal protection

ANTIRUST CHASSIS is a combination of anticorrosive primer and alkyd based final paint. Very strong adhesion and elasticity. High resistance to washing- scrubbing and on petroleum, machine oils shocks and rubbing. Ideal for painting cars chassis and for all metallic surfaces. Also, may be used as an anticorrosive primer.

  • anticorrosive protection
  • resistant & quick-drying
  • strong adhesion
1
BUILDINGS – EXTERIOR USE
semigloss
Finish
toolsall
TOOLS
ANTIRUST CHASSIS
THINNING
0.5 hr
DRYING TIME
16 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
12 2
m2/L
SPREADING RATES
582
light_grey
584
gkri
585
keramidi
589

Preparation

Carefully prepare surface to obtain good results. Remove all weathered coatings, loose materials and oils. Sand surface smooth and remove sanding residue with a rag.

Previously painted metallic surfaces:
Sand and clean sanding residue. Prime with ANTIRUST CHASSIS undercoat, 1-2 coats.
► New metallic surfaces:
Degrease using THINNER 135 applied with a brush. Prime with ANTIRUST CHASSIS undercoat, 1-2 coats.

Use

► Stir well before and during application.
► Before the application of the top coat, sand surface with appropriate sanding paper and remove sanding residue.
► Apply 2 coats with a roller or a brush thinned with WHITE SPIRIT by 5-10% or with airless spray gun, thinned with THINNER 135 by 10-20%.
► While the first coat is fully hardened, apply the second coat.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 4-6 hours.

Practical coverage: 8--12m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for