DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 2.5 L

AQUARUST

water-based anti-rust primer for metal surfaces

Alkyd anti-rust undercoat for new or previously coated metal surfaces, weathered galvanized surfaces and other exterior and interior metal surfaces. The anti-rust pigments of its organically modified zinc phosphate protect metal surfaces against corrosion and rust. Due to its excellent adhesion on metal and other coated surfaces, AQUARUST can also be used as an intermediate protective layer. Ensures a smooth surface for premium finish.

  • high anti-rust protection
  • with special rust converter
  • excellent adhesion
xrisi3xrisi3
BUILDINGS
INTERIOR-EXTERIOR USE
xrisi3
MARINE USE-FREEBOARDS
satin
Finish
toolsall
TOOLS
AQUARUST
THINNING
1-2 hr
DRYING TIME
4-6 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
9 2
m2/L
SPREADING RATES
495

Preparation

Carefully prepare surface to obtain good results. Remove all weathered coatings, loose materials and grease. Sand and remove sanding residue with a rag.

► Previously painted metal surfaces:
Sand-blast or sand-paper to remove rust. Clean sanding residue. Prime with AQUARUST undercoat, 1-2 coats.

► New metal:
Degrease using THINNER 135 applied with a brush. Prime with AQUARUST undercoat, 1-2 coats.

Use

Roller, brush or spray airless. Thin by 5-15% with water.

Minimum application temperature:5°C.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness. Touch dry: 1-2 hours. Recoat: 4-6 hours. Practical coverage: 7-11m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for