METAL-X

alkyd metal enamel

Gloss alkyd enamel of extreme resistance and toughness for interior and exterior metal. Ensures a high gloss, anti-corrosive finish, non yellowing over time. Quick-drying, shock and wear resistant. Unaltered shades in adverse weather conditions, withstanding frequent washing. Suitable for metal surfaces, such as doors, balusters, iron structures, machinery, vehicles, industrial equipment, tools and any metal structure. Easy to work, easy flow. Provides a protective and fine finish.

quick drying
high gloss finish
anti-corrosive finish

BUILDINGS
INTERIOR-EXTERIOR USE

MARINE USE-FREEBOARDS

highgloss

Finish

TOOLS

THINNING

1-2 hr

DRYING TIME

4-6 hrs

OVERCOATING INTERVAL

1- 2

RECOMMENDED COATS

13		2
m²/L

SPREADING RATES

READY TO USE COLOR SHADES

Preparation

Carefully prepare surface to obtain good results. Remove all weathered coatings, loose materials and oils. Sand surface smooth and remove sanding residue with a rag.

► Previously painted metal surfaces:
Sand the surface with the right sand paper for the task to obtain a non-glossy appearance. Apply 2 coats of METAL-X.
► New metal:
For a better anti-rust protection, prime with ANTIRUST or MARINE MINIO. Sand the surface smooth before application of the top coat. Apply 1-2 coats of METAL-X.

Use

Roller, brush or spray airless. Thin by 5-10% WHITE SPIRIT/THINNER 135.

Minimum application temperature: 5°C

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness. Touch dry: 1-2 hours. Recoat: 4-6 hours. Practical coverage: 11-15m²/lt depending on the thickness of each coat and the surface porosity.