DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 2.5 L

POLACRYL 320

Header

water-based wood protective varnish

POLACRYL 320 is a high-quality hybrid acrylic water-based varnish which protects and enhances your wood. It is odourless and, thus, ideal for use on interior wood. Its hybrid composition allows for excellent results also on exterior wood. Its special composition fully prevents the development of mould and fungi on its film. This varnish has water repellent properties and excellent elasticity. It does not flake off, blister or crack. It highlights wood grains enhancing wood’s natural beauty. It offers strong protection against harsh UV radiation, rain and humidity. Indispensable for new or bare wood. Suitable for use on doors, windows, window frames, wooden lining, pergolas and any wooden surface.

  • protects and enhances wood
  • highly penetrating - non chipping
  • reinforced protection with UV filters
xrisi2xrisi2
BUILDINGS
INTERIOR-EXTERIOR USE
satin
Finish
toolsall
TOOLS
POLACRYL 320
THINNING
1-2 hr
DRYING TIME
4-6 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
12 sin plin 4
m2/L
SPREADING RATES
colortouch TINTING
water READY TO USE COLOR SHADES pdf icon

Preparation

Surfaces must be clean, free of resins, tree resin, oil, old weathered coatings and dust. Sand surface smooth using the right sandpaper for the task.

► General:
For extra wood protection, apply 1 coat of colourless wood preservative POLACRYL 321 before application of POLACRYL 320.
New wood:
Apply 1 or 2 coats of POLACRYL 320.
Previously varnished wood:
Remove varnish in poor condition. Sand surface and apply 1-2 coats of POLACRYL 320.

Use

► Stir well before use.
► Sand surface smooth with the right sandpaper for the task before painting.
► Do not apply when temperature is below 5ºC, above 35ºC, when relative humidity is above 80% and wood moisture content is above 18%.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 4-6 hours.

Practical coverage: 8-16m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for